APPLICATIONS:
This model of USB chargers are specifically designed to be installed on motorcycles,scooters,or e-bikes for charging cell phones and other 5V electronic devices.
SPECIFICATIONS:
MODEL |
STANDARD
INPUT VOLTAGE |
OPERATING
VOLTAGE |
OUTPUT
VOLTAGE |
OUTPUT
CURRENT |
MJ-01B1 |
12V |
8-18V |
5±0.25V |
≤1A |
MJ-01B2 |
24V |
18-28V |
5±0.25V |
≤1A |
MJ-01B3 |
36V |
30-40V |
5±0.25V |
≤1A |
MJ-01B4 |
48V |
40-52V |
5±0.25V |
≤1A |
MJ-01B5 |
60V |
52-66V |
5±0.25V |
≤1A |
INSTALLATION:
Install the brackets to the bar or mount to a plastic part of the vehicle using two screws.
Plug the charger onto the bracket slot.
DIRECTION:
1.Unplug the rubber cover.
2.Connect the USB connector of your phone/device to the charer.
3.Switch on your motorcycle or bike to start charging.
WARNINGS:
1.The wires should not be installed bypassing the ignition switch;otherwise the vehicle may run out of battery under prolonged charging.
2.The input voltage shall be within the operating voltage range.When the vehicle is equipped with a magneto,the surge input peak-peak voltage shall be less than 50V.
3.Water or heavy rain shall not be poured directly into the USB socket.
4.Heavy impact force may damage the USB charger.Avoid to short the circult.
5.The illustrated product may not be exactly same as the packed charger due to update to the product.